|
|
Build Your Online Product Catalogs?
| Product Name: |
fluorocarbon coating punching aluminum veneer
|
| Supply Ability: |
120000m2 |
| Related proudcts |
aluminum veneer, |
| Specifications |
Conventional thickness: 1.5mm, 2.0mm, 2.5mm, 3.0mm. |
| Price Term: |
FOB |
| Port of loading: |
TIANJIN |
| Minimum Order |
50m2 |
| Unit Price: |
USD30/m2 |
|
The aluminum veneer uses 1100, 3003, 5005 aluminum alloy plates as the base+ material. The surface coating is divided into fluorocarbon spraying, powder spraying, polyester paint spraying, and fluorocarbon pre-roller coating. The fluorocarbon sprayed surface coating is divided into two coatings, one baking, three coatings, one baking, and three coatings and two bakings. The powder coating surface coating is one coating and one baking.
Conventional thickness: 1.5mm, 2.0mm, 2.5mm, 3.0mm.
Common specifications: 600 * 600mm, 600 * 1200mm
Installation method of aluminum veneer
1. Install the closing corners according to the same level.
2.According to different requirements, there are different skeletons, angle steel fixing, embedded parts aluminum fixing, etc. There are different fixing methods according to different products.
3, the pre-installed on the gusset keel, together with the gusset keel close to the light steel keel to buckle vertically under the light steel keel, the gusset keel ***cing is ***ermined according to the size of the plate, you must adjust after all To the level.
4. Buckle the aluminum plate in order on the keel. After each buckle, press down the locking piece, and use the connecting piece to connect the keel.
5. When installing the board, you must wear gloves. If you accidentally leave fingerprints or stains, you can wash with ***ergent and wipe dry. |
| Company: |
Tianjin Maynowei New Material Technology Technical Co., Ltd
|
| Contact: |
Ms. Lydia Guo |
| Address: |
No 6th, jinghai economic and technological development zone,Tian jin,China |
| Postcode: |
|
| Tel: |
86 17622976391 |
| Fax: |
|
| E-mail: |
|
|
|
|
Home
